Serial RS232 RS485 to GSM GPRS Converter with IOT function


Serial RS232 RS485 to GSM GPRS Converter with IOT function

The RS232/RS485 uses to collect the transparent data transmission. It is a wireless terminal utility that converts serial data to IP data and then to serial data over the GPRS network. The serial port is bidirectional transparently transmitted to the network through this product's command. GSM serial RS232/RS485 modem function the Input voltage of 5-36V DC. The four pins RJ45 and interface protection ethernet connector will isolate 2KV electromagnetic. It manufactures in the form of a customizable way with the MAC address.

Serial RS232 RS485 to GSM GPRS Converter with IOT function In Details

KTronics is a well-known company that sells water level controller indicators, GSM/GPRS modems, and Internet of Things (IoT) solutions around India. For over ten years, they have supplied water level controller indicators. The product of the RS232/RS485 GSM/GRPS converter function transforms the data with the signal via a wireless connection of a WIFI network. It enables the ethernet converter to transmit data at the same time.

Multilevel indicators will monitor communication and operational status and support Modbus for industrial applications. The different devices will establish outstanding support to identify the customized registration packet, auto passing the registered packets. This support customized packs to monitor the connection is truthful and retrieving sensor data. The process configuration is done either by AT commands, SMS, embed kits, or from the PLC. This product is used widely in industrial, municipal, environmental, and agricultural applications.

Special Features

It is a Quad-band GSM/GPRS RS232/RS485 serial interface.
Multi transmission and network modes(SMS, network, and HTTPD)
5-36v DC Input voltage
TCP and UDP support
It supports dual data centres. (one main and another backup support)
Gain support via SMS configuration.
Upgrade firmware of MCU with FTP.
It contains Multilevel transmission and network modes(SMS, network, and HTTPD)

Office Address

13, Plot No.49, Ground Floor,

2nd Cross Street, Thirumalai Nagar,


Chennai – 600096.

Manufacturing Address

Ktronics Automation & Controllers,

13, plot No.49, Ground Floor,

2nd Cross Street, Thirumalai Nagar,

Perungudi, Chennai - 600 096